GE FANUC IC693MDL731 TYPICAL SCAN RATE SERIES 90-30 PROCESSOR MODULE

The IC693MDL731 module is a discrete output module manufactured by GE Fanuc. The IC693MDL731 module features 8 circuit outputs and

it is a 12 to 24 Volts DC rated discrete output module. The module comes with DC power and the output voltage range is 12 to 24 Volts DC.

The unit comes with 2.0 Amps of load current per point and it features 2 milliseconds response time when turning ON or OFF.

The IC693MDL731 module features the transistor output type while the polarity is rated as negative. The component features 8 points per

common and the connector type is a terminal block with 20 screws per module. The internal power is 55 milliamps at 5 Volts DC. The input

voltage range is rated at 24 Volts DC while the on-state voltage is 15 Volts DC minimum. The component features an off-state voltage of

6 Volts DC maximum while the on-state current is 4.5 milliamps minimum.

The GE Fanuc IC693MDL731 module should always be mounted safely and the installers should ensure that it is istalled in the proper

protective enclosure. Moreover, the unit should make use of the application program in order to run properly, and the installers should also

ensure proper grounding. The ground conductors should always be connected in a tree fashion, with the branches routed to the central earth

ground points. Moreover, the ground conductors should be as short and as large in size as possible. The IC693MDL731 module features an

aluminum PLC baseplate which is used for module shield grounding. The CPUs in the PLC with external port connections must have a separate

shield ground connection to ensure the proper shielding of the ports.